HARZ Labs offers a wide range of products for DLP/LCD, SLA and other 3D printing technologies. The research and production complex in Russia allows us to produce polymers for various applications and develop innovative materials. They cooperate with leading institutes, dentists and dental laboratories around the world.
Dental Yellow Clear PRO is a hard PMMA-like resin, made of biocompatible raw materials. It is designed for printing autoclavable transparent models of surgical guides. Precise, chemical resistant, and durable. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory.
Characteristics
Appearance : Colored transparent liquid
Colour : Transparent Yellow
Elongation at break : 10 ± 3.0 %
Hardness Shore D : 85.0 ± 3.0
Odor : Weak odor
Shrinkage : <0.5%
Tensile strength : 80.0 ± 5.0 MPa
Viscosity (Brookfield) : 600 ± 200 mPa·s
Dental Yellow Clear is a hard PMMA-like resin, made of biocompatible raw materials. It is designed for printing transparent models of surgical guides. Precise, chemical resistant, and durable. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory.
Characteristics
Appearance : Colored transparent liquid
Colour : Transparent Yellow
Elongation at break : 6.2 ± 3.1 %
Hardness Shore D : 85.0 ± 3.0
Odor : Weak odor
Shrinkage : <0.5%
Tensile strength : 60.0 ± 5.0 mPa
Viscosity (Brookfield) : 600 ± 200 mPa·s
Dental Clear is a hard PMMA-like resin, made of biocompatible raw materials. It has high accuracy and elasticity, passing for multiple installations and removal. The printed models are tasteless, odorless, and do not shrink over time. Autoclaving is recommended for sterilization and better transparency. Resistant to disinfectant solutions. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory.
Characteristics
Appearance : Clear liquid
Colour : Clear
Elongation at break : 6.2 ± 3.1%
Hardness Shore D : 85.0 ± 3.0
Odor : Weak odor
Shrinkage : <0.5%
Tensile strength : 80.0 ± 5.0 MPa
Viscosity (Brookfield) : 1000 ± 200 mPa·s
Dental Sand is a resin with PMMA-type ceramic micro filling, made of biocompatible raw materials. Available in shades: A1-A2, A3. It has high durability and high tensile strength, resistant to mechanical and chemical effects. Recommended for printing models of temporary crowns and bridges. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory.
Characteristics
Appearance : Opaque liquid
Colour : А1-А2, А3, Bleach
Elongation at break : 7.1 ± 3.1 %
Hardness Shore D : 82.0 ± 3.0
Odor : Weak odor
Shrinkage : <0.5%
Tensile strength : 95.0 ±10.0 МPa
Viscosity (Brookfield) : 1050 ± 250 mPa·s
Dental is Bleach a resin with PMMA-type ceramic micro filling, made of biocompatible material. It has high durability and high tensile strength, resistant to mechanical and chemical stress. Recommended for printing models of temporal crowns and bridges. Slight odor and lack of hazardous monomers allow for using it even in a small laboratory. Meets the requirements of iso 10993.Certified for medical use.
Characteristics
Appearance : Opaque liquid
Colour : Bleach
Elongation at break : 6.2 ± 3.1 %
Hardness Shore D : 85.0 ± 3.0
Odor : Odorless
Shrinkage : <0.5%
Tensile strength : 60.0 ± 5.0 mPa
Viscosity (Brookfield) : 50 ± 250 mPa*s
Dental Peach photopolymer is a matte resin made from biocompatible raw materials. Available colors: Peach, Beige, Bone. It has a high Shore D hardness and high tensile strength, resistant to mechanical and thermal influences. The weakly expressed smell and the absence of harmful monomers allows you to work with it even in a small laboratory. Certified for medical use.
Characteristics
Appearance : Opaque liquid
Colour : Peach
Elongation at break : 7.1 ± 3.1%
Hardness Shore D : 79.0 ± 2.0
Odor : Weak odor
Shrinkage : <0.5%
Tensile strength : 45.2 ± 4.4 MPa
Viscosity (Brookfield) : 575 ± 225 mPa·s
Dental Model resin is made from biocompatible raw materials. It has a matte surface, high durability and tensile strength. Available colors: Peach, Beige, Bone. The slight odor and lack of hazardous monomers allow for performing printing even in a small laboratory.
Characteristics
Appearance : Opaque liquid
Colour : Biege
Elongation at break : 11 ± 1 %
Hardness Shore D : 84.0 ± 2.0
Odor : Weak odor
Shrinkage : <0,3%
Tensile strength : 95.0 ±10.0 МPa
Viscosity (Brookfield) : 1000 ± 200 mPа∙с
Dental Model resin is made from biocompatible raw materials. It has a matte surface, high durability and tensile strength. Available colors: Peach, Beige, Bone. The slight odor and lack of hazardous monomers allow for performing printing even in a small laboratory.
Characteristics
Appearance : Opaque liquid
Colour : Bone
Elongation at break : 11 ± 1 %
Hardness Shore D : 84.0 ± 2.0
Odor : Weak odor
Shrinkage : <0.3%
Tensile strength : 80.0 ± 10 MPa
Viscosity (Brookfield) : 900 ± 300 mPa*s
Dental Pink is a hard PMMA-like resin, made of biocompatible raw materials. It is designed for printing models of temporary denture bases. It has high durability and high tensile strength, resistant to mechanical and chemical effects. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory.
Characteristics
Appearance : Opaque liquid
Colour : Pink
Elongation at break : 6.8 ± 2.1 %
Hardness Shore D : 82 ± 3
Odor : Weak odor
Shrinkage : <0.5%
Tensile strength : 65.1 ± 2.1 MPa
Viscosity (Brookfield) : 1050 ± 250 mPa*s
Dental Soft Pink is used for printing gingiva masks in a digital workflow. Mechanical properties are close to real gingiva: good elasticity and softness, necessary to simulate soft tissue. The slight odor and lack of hazardous monomers allow for performing printing even in a small laboratory.
Characteristics
Appearance : Clear colored liquid
Colour : Pink
Elongation at break : 140 ± 20 %
Hardness Shore D : -
Odor : Weak odor
Shrinkage : <0,5%
Tensile strength : 6.0 ± 2.0 MPa
Viscosity (Brookfield) : 350 ± 150 mPa*s
3D Printer Settings
Dental Cast resin is a great choice for direct casting of metal and pressed ceramics crowns and bridges. Early zero ash content (less than 0.1%) and thermoplastic properties make the resin suitable for direct casting. The resin has been designed to burn out quickly at high temperatures to reduce production time. We recommend using phosphate-bonded casting investment material that can handle plastics at high temperatures to ensure the best casting quality.
Characteristics
Appearance : Colored transparent liquid
Colour : Translucent Cherry
Elongation at break : -
Hardness Shore D : -
Odor : Weak odor
Shrinkage : <1%
Tensile strength : -
Viscosity (Brookfield) : 115 ± 85 mPa*s
3D Printer Settings
Dental Tray is a hard PMMA-like resin, made of biocompatible raw materials. It has the necessary retention to dental impression materials and is stable over time, providing long-term storage of the silicone impressions. The possibility of printing with a layer up to 200 microns allows for reducing the printing time. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory.
Characteristics
Appearance : Opaque liquid
Colour : Translucent Blue
Elongation at break : 6 ± 3 %
Hardness Shore D : 85 ± 5
Odor : Weak odor
Shrinkage : <0.5%
Tensile strength : 60 ± 10 mPa
Viscosity (Brookfield) : 600 ± 200 mPa∙s
3D Printer Settings
created with
Website Builder .